Motor-driven calibration and adjustment device from 1 to 400 N·m No. 7794-2
Technical Information:
Code | 96521093 |
---|---|
EAN Code | 4018754214891 |
Article Number | 7794 - 2 |
for transducers | 7728 (sizes 1-100) |
The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for calibration and adjustment tasks on torque wrenches
- measurement possible without moving the point of application of force
- prevents faulty readings thanks to precision-mounted spindle and finely regulated motor
- extremely accurate calibration thanks to optimised bearings and square drives for the transducers
- rapid, easy change of transducers thanks to quick-release latching system
- convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation
- saves time because the bridge support is locked in place using a single-handed eccentric lever
- transmission of readings to a PC via USB interface for further processing, analysis and archiving
- calibration certificates can be printed or saved as a PDF file after calibration
- as found / as left calibrations can be documented
- during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request
- can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches
- calibration up to 1000 N·m is possible using the easily attached extension unit No 7791-1 <!-- (see p. [171220]) -->
- design patent
- other patents applied for
- both clicking and indicating torque wrenches can be calibrated
Calibration of transducers is possible using reference torque wrenches No 7770-100 and 7770-1000, available on request.
Content: 6 calibrating square drive insert tools No 734K (sizes 4, 5, 12, 20, 40, 100), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, 1 software Torkmaster 7731-1, 1 jack cable No 7751, 1 spiral cable No 7752, 1 spiral cable No 7751-2 with jack plug and self-locking precision plug, 1 low-temperature cable connector, 1 hexagon key wrench No 10760CV size 2 mm are included.
The unit is supplied without the torque wrench, transducers or notebook.
Transducers laboratory No 7728 <!-- (see p. [206238]) -->
Khách hàng có thể tham khảo thông tin sản phẩm trực tiếp từ hãng ở link bên dưới:
Link sản phẩm hãng: https://www.stahlwille.de/products/de_en/96521093-96521093.html