CẦN XIẾT LỰC MANOSKOP® SIZE 5 10–50 N·m 9x12mm STAHLWILLE 730Fix 96503005
Torque wrench Service MANOSKOP® with receptacle for insertion tools No. 730Fix
Technical Information:
Code | 96503005 |
---|---|
EAN Code | 4018754269433 |
Article Number | 730N/5 FIX |
Measuring range [1] | 10–50 N·m |
- for daily use in series production
- the setting knob can be unscrewed after the target has been set – making inadvertent changes to the settings impossible
- the TORX® TAMPER-RESISTANT locking screw supplied with the tool also protects against unwanted manipulation the adhesive seals supplied offer a further level of security. It is not possible to adjust the setting without breaking the seal
- click-type
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- mount for interchangeable insert tools
- QuickRelease safety lock
- fast, accurate setting thanks to QuickSelect quick-action adjuster
- dual stop signal
- easy-to-read double scale with colour coding to differentiate between N·m/ft·lb and ft·lb/in·lb scales
- can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw -does not act on the trigger mechanism and cannot cause damage to it
- two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and skydrol)
- calibration using perfectControl® calibrating unit No 7794 or calibration system No 7706. Readjustment does not require disassembly
- certificate in accordance with DIN EN ISO 6789-2:2017
- registered design
- in sturdy plastic box (size 80-100 in steel box)
- display deviation value ± 3%
Khách hàng có thể tham khảo thông tin sản phẩm trực tiếp từ hãng ở link bên dưới:
Link sản phẩm hãng: https://www.stahlwille.de/products/de_en/96503005-96503005.html