BỘ KIỂM TRA LỰC ĐIỆN TỬ SENSOTORK® No.7707-1-3W 0,2–10N.m STAHLWILLE 7707 W 96521086

Electronic workshop tester SENSOTORK® No. 7707 W

• Compact torque tester for easy adaptation by replacement of the transducers
• high degree of accuracy thanks to flat transducer and conversion and digitalisation of readings within the transducer
• high degree of safety through display showing actual torque read-off where clicking torque wrenches are used

• Electronic torque tester for torque wrenches, consisting of:

• transducer, patent
• holder
• display unit (registered design)
• tripod for display unit (with 1.5 m cable)

•  

  QuickRelease Rapid change and firm locking of the transducers thanks to the QuickRelease safety lock.

  Interchangeable square drive adapters: A set of interchangeable square drive adapters are conveniently stored in the mounting block for a range of different drive sizes.

• spiral cable
• mains adaptor (110 V–230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible
• square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W)
• kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position
• for clockwise and anticlockwise use
• Units of measurement: N·m, ft·lb, in·lb
• The easily interchangeable transducers are attached to the holder by means of a QuickRelease safety lock
• low lateral forces thanks to low-profile transducers
• automatic detection of the transducer
• flexible and user friendly because the unit can be used horizontally or vertically and the display unit can be placed in many positions
• additional tripod with 1.5 m cable for mounting the display unit to facilitate visual monitoring when using longer torque wrenches
• especially broad measuring range from approx. 2 % to 100 % of rated value
• the software No 7759-4, including USB hub and jack cable, enables readings to be transferred to the PC for documenting (no separate power supply needed, power comes from PC)
• while individual transducers are being recalibrated, the torque tester itself remains on-site for further use
• wide range of application (-20°C to +60°C)
• complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003
• with certificate
• supplied in sturdy plastic case